Allied Telesis AT-8100 Series - Manual (Page 1613)

AT-8100 Switch Command Line User’s Guide
1613
This example discards tagged packets from UDP ports 67 to 87 if they are
from the 154.11.234.0 network and are going to the 154.11.235.0 network,
and have a VID of 20. Then the ACL is assigned to port 8:
awplus> enable
awplus# configure terminal
awplus(config)# ip access-list denyudp2
awplus(config-ip-acl)# deny udp 154.11.234.0/24 range 67 87
154.11.235.0/24
range 67 87 vlan 20
awplus(config-ip-acl)# exit
awplus(config)# interface port1.0.8
awplus(config-if)# access-group denyudp2
This example creates a deny access list called “ udpdeny” that discards all
tagged ingress UDP packets from the 152.12.45.0/16 subnet. Then the
ACL is assigned to port 1:
awplus> enable
awplus# configure terminal
awplus(config)# ip access-list udpdeny
awplus(config-ip-acl)# deny udp 152.12.45.0/16 any
awplus(config-ip-acl)# exit
awplus(config)# interface port1.0.1
awplus(config-if)# access-group udpdeny