Allied Telesis AT-8100 Series - Manual (Page 887)

AT-8100 Switch Command Line User’s Guide
887
SPANNING-TREE ERRDISABLE-TIMEOUT ENABLE
Syntax
spanning-tree errdisable-timeout enable
Parameters
None
Mode
Global Configuration mode
Description
Use this command to activate the timer for the BPDU guard feature. The
BPDU guard feature prevents unnecessary domain convergences by
disabling edge ports if they receive BPDUs. When the timer is activated,
the switch will automatically reactivate disabled ports. The time interval
that ports remain disabled is set with “SPANNING-TREE ERRDISABLE-
TIMEOUT INTERVAL” on page 888.
To disable the timer for the BPDU guard feature, use the NO SPANNING-
TREE ERRDISABLE TIMEOUT INTERVAL command.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 170
Example
The following example activates the timer for the BPDU guard feature:
awplus> enable
awplus# configure terminal
awplus(config)# spanning-tree errdisable-timeout enable