Allied Telesis AT-8100 Series - Manual (Page 1702)

Chapter 101: QoS Commands
1702
In the following example, VLAN 50 becomes the voice VLAN on port
1.0.22, and DSCP is trusted on traffic ingressing onto this port:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.22
awplus(config-if)# auto-qos voice 50 trust dscp
In the following example, VLAN 100 becomes the voice VLAN on port
1.0.15:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.15
awplus(config-if)# auto-qos voice 100
In the following example, DSCP is trusted on traffic ingressing onto port
1.0.30:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.30
awplus(config-if)# auto-qos voice trust dscp