Allied Telesis AT-8100 Series - Manual (Page 1847)

AT-8100 Switch Command Line User’s Guide
1847
SHOW IP INTERFACE
Syntax
show ip interface
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the routing interfaces on the switch.
Figure 282 is an example of the information.
Figure 282. SHOW IP INTERFACE Command
The fields are described in Table 254.
Table 254. SHOW IP INTERFACE Command
Parameter Description
Interface The VID of the VLAN to which the routing
interface is assigned.
IP Address The IP address and mask (in decimal
notation) of the routing interface.
Status Status of the routing interface.
Interface IP Address Status Protocol
VLAN14-0 123.94.146.34/24 admin up running
VLAN25-0 123.94.152.72/24 admin up running
VLAN26-0 123.94.126.4/24 admin up running
VLAN28-0 123.94.111.37/24 admin up running