Allied Telesis AT-8100 Series - Manual (Page 459)

459
Chapter 26
Link-flap Protection Commands
The link-flap protection commands are summarized in the following table:
Table 43. Link-flap Protection Commands
Command Mode Description
“LINK-FLAP DURATION” on
page 460 Global Configuration Specifies the time period for link-flap
events.
“LINK-FLAP PROTECTION”
on page 461 Port Interface Activates link-flap protection on the ports.
“LINK-FLAP RATE” on
page 462 Global Configuration Specifies the number of link state
changes that constitute link-flap events.
“NO LINK-FLAP
PROTECTION” on
page 463 Port Interface Disables link-flap protection on the ports.
“SHOW LINK-FLAP” on
page 464 User Exec and
Privileged Exec Displays the status and settings of link-
flap protection on the switch.