Allied Telesis AT-8100 Series - Manual (Page 1694)

Chapter 100: Quality of Service (QoS)
1694
The CoS values in the first line are matched with the egress queue
assignments in the second line. For example, in Figure 263 on page 1693,
port 1 packets with a CoS value of 0 are placed in egress queue 2,
packets with a CoS value of 1 are placed in egress queue 0, and so on.
For more information about this command, see “SHOW MLS QOS MAPS
COS-QUEUE” on page 1673.
Displaying DSCP
to Queue
Mappings
Use this command to display the mappings of DSCP values to egress
queues. The syntax of this command is:
show mls qos maps dscp-queue
See Figure 264 on page 1695 for an example of this information. For more
information about this command, see “SHOW MLS QOS MAPS DSCP-
QUEUE” on page 1674.