Allied Telesis AT-8100 Series - Manual (Page 767)

AT-8100 Switch Command Line User’s Guide
767
SHOW ETHERCHANNEL DETAIL
Syntax
show etherchannel detail
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display detailed information about the aggregators
on the switch. Figure 145 illustrates the information.
Figure 145. SHOW ETHERCHANNEL DETAIL Command
Aggregator # 1 ..... po1
Mac address: (00-15-77-d8-43-60,0000)
Admin Key: 0xff01 - Oper Key: 0x0101
Receive link count: 4 - Transmit link count: 4
Individual: 0 - Ready: 0
Distribution Mode .. MACBoth
Partner LAG: (0080,00-a0-d2-00-94-24,F601)
Link: Port 1.0.1
sync
Link: Port 1.0.2 sync
Link: Port 1.0.3 sync
Link: Port 1.0.4 sync
Aggregator # 22..... po22
Mac address: (00-15-77-d8-43-60,0000)
Admin Key: 0xff16 - Oper Key: 0x1616
Receive link count: 0 - Transmit link count: 0
Individual: 0 - Ready: 0
Distribution Mode .. MACDest
Partner LAG: (0000,00-00-00-00-00-00,0000)
Link: Port 1.0.22
disabled
Link: Port 1.0.23 disabled
Link: Port 1.0.24 disabled