Allied Telesis AT-8100 Series - Manual (Page 171)

AT-8100 Switch Command Line User’s Guide
171
SHOW SWITCH
Syntax
show switch
Parameters
None
Modes
Privileged Exec mode
Description
Use this command to view the information in Figure 41.
Figure 41. SHOW SWITCH Command
The fields are described in Table 9.
Table 9. SHOW SWITCH Command
Parameter Description
Application Software
Version The version number of the management
software.
Application Software Build
Date The date and time when Allied Telesis
released this version of the management
software.
MAC Address The MAC address of the switch.
Switch Information:
Application Software Version ......... v1.0.0
Application Software Build date ...... May 2010 10:24:12
MAC Address .......................... 00:15:77:cc:e2:42
Active Spanning Tree version ......... RSTP
Console Disconnect Timer Interval .... 10 minute(s)
Telnet Server status ................. Enabled
MAC address aging time ............... 300 second(s)