Allied Telesis AT-8100 Series - Manual (Page 680)

Chapter 44: DHCP Snooping Commands
680
SHOW IP SOURCE BINDING
Syntax
show ip source binding
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display static entries in the DHCP snooping
database. The static entries have been added with the IP SOURCE
BINDING command. See “IP SOURCE BINDING” on page 664
Example
This example displays static entries in the DHCP snooping database:
awplus> enable
awplus# show ip source binding
See Figure 132 for a sample of this display. See Table 77 on page 681 for
an explanation of the parameters in this display.
Figure 132. SHOW IP DHCP SOURCE BINDING Command
awplus# show ip dhcp source binding
IP Source Bindings:
Client MAC Expires
IP Address Address VLAN Port (sec) Type
---------------------------------------------------------------------------
1.1.1.1
0000.1111.2222 1 port1.0.21 Infinite Static