Allied Telesis AT-8100 Series - Manual (Page 644)

Chapter 44: DHCP Snooping Commands
644
CLEAR ARP SECURITY STATISTICS
Syntax
clear arp security statistics interface port-list
Parameters
interface
Specifies a port list.
Mode
Privileged Exec mode
Description
Use this command to clear ARP security violations from the specified
ports. For information about defining ARP security violations, see “ARP
SECURITY VIOLATION” on page 642.
For instructions about how to specify ports, see “Port Numbers in
Commands” on page 69.
Confirmation Command
“SHOW RUNNING-CONFIG” on page 170
Example
This example clears the ARP security violations on ports 20-24:
awplus> enable
awplus# configure terminal
awplus(config)# interface port1.0.20-port1.0.24
awplus(config-if)# clear arp security statistics