Allied Telesis AT-8100 Series - Manual (Page 739)

739
Chapter 50
Static Port Trunk Commands
The static port trunk commands are summarized in Table 86 and
described in detail within the chapter.
.
Table 86. Static Port Trunk Commands
Command Mode Description
“NO STATIC-CHANNEL-GROUP” on
page 740 Port Interface Removes ports from existing static
port trunks and deletes trunks from
the switch.
“PORT-CHANNEL LOAD-BALANCE”
on page 741 Static Port
Trunk Interface Sets the load distribution methods of
static port trunks.
“SHOW STATIC-CHANNEL-GROUP”
on page 743 User Exec and
Privileged Exec Displays the specifications of the
static port trunks.
“STATIC-CHANNEL-GROUP” on
page 744 Port Interface Creates a new static port trunk and
adds ports to an existing static port
trunk.