Show interface command – Allied Telesis AT-8100 Series User Manual
Page 235

AT-8100 Switch Command Line User’s Guide
235
Figure 54. SHOW INTERFACE Command
The fields are described in Table 13.
Interface port1.0.1
Link is UP, administrative state is UP
Address is 0015.77cc.e243
Description:
index 1 mtu 9198
Unknown Ingress Multicast Blocking: Disabled
Unknown Egress Multicast Blocking: Disabled
SNMP link-status traps: Enabled (Suppressed in 0 sec.)
Bandwidth 1g
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 0, bytes 0, multicast packets 0 broadcast packets 0
Interface port1.0.2
Link is UP, administrative state is UP
Address is 0015.77cc.e244
Description:
index 1 mtu 9198
Unknown Ingress Multicast Blocking: Disabled
Unknown Egress Multicast Blocking: Disabled
SNMP link-status traps: Enabled (Suppressed in 0 sec.)
Bandwidth 1g
input packets 0, bytes 0, dropped 0, multicast packets 0
output packets 0, bytes 0, multicast packets 0 broadcast packets 0
Table 13. SHOW INTERFACE Command
Parameter
Description
Interface
Port number.