Allied Telesis AT-8100 Series - Manual (Page 331)

AT-8100 Switch Command Line User’s Guide
331
SHOW IP INTERFACE
Syntax
show ip interface
Parameters
None
Mode
Privileged Exec mode
Description
Use this command to display the management IP address on the switch.
Figure 72 is an example of the information.
Figure 72. SHOW IP INTERFACE Command
The Interface field is the VID of the VLAN to which the management IP
address is assigned. The IP Address field is the management IP address
of the switch.
Example
The following example displays the management IP address assigned to a
switch:
awplus# show ip interface
Interface IP Address Status Protocol
VLAN14-0 123.94.146.72 admin up down