WIKA Pascal 100 - Manual (Page 17)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 17
GB
6 Commissioning, operation
6.1 Commissioning
6.1.1 Instrument Overview
1
Connectors for external P transducer 10 Hand pump (vacuum/21 bar)
2 Pressure modules 11 Pneumatic distribution
3 IN electrical/temperature modules 12 Fine adjustment
4 OUT electrical/temperature modules 13 Connector RS-232
5 Power ON 14 Connector for battery charger
6 Power OFF 15 Battery
7 Contrast + 16 Environmental Parameter Connector
8 Contrast – 17 Loop power supply – 24 V d.c.
9 Back light OFF (Lamp)
6.1.2 Functional Modules
The functional modules can be classified according to their assignments:

■ Electrical and temperature signals measurement
■ Pressure measurement, (2 different modules, up to 4 internal pressure sensors and 2
connectors for external pressure sensor)
■ Electrical and temperature signals generation/simulation
■
Pressure generation and regulation
■ Environmental parameters measurement
Many different configurations are available according to the specific requirements of the user.
3
4
5 6 7 8
12
10
11
1
2
9
13
14
15
16
17