WIKA Pascal 100 - Manual (Page 51)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 51
GB
The next selection ask if a passive or active loop is required (with 24 V supply for the loop).
Figure 58 – mA loop generation setup
6.4.2.6 Channel 4
– mathematic functions
Channel four has an additional setting named CALC. This function enables to display on channel
n. 4 a value, result of the combination of the values displayed in channel 1 and 2. To access, press
on the display of channel 4, then Channel on the bottom bar and then assign.
Figure 59 – Channel 4 assignment