WIKA Pascal 100 - Manual (Page 31)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 31
GB
6.4.1 Channel configuration
The assignment of a function to a software channel is a simple procedure that guides the operator
step by step.
The channel assignments are very similar, therefore only one assignment will be shown as
example. The following procedure shows how to set up the Pascal 100 or Pascal 100/IS for
temperature measurement through a Pt100 thermo resistance connected to the input pins of the IN
A module (using 4 wires measurement).
The selection of one of the four available software channels is made by pressing one of the four
big channel displays, as shown in the figure below.
Channel selection
To verify if the channel has been correctly selected it is possible to check if the word
“Channel”, in the respective channel block, is in a negative form (white on black
background) or not. See figure below.
Figure 14 – Channel 1 selected
To continue the assignment procedure select CHANNEL menu and press ASSIGN.
Figure 15 - Menu ASSIGN selected.