WIKA Pascal 100 - Manual (Page 43)

6 Commissioning, operation
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 43
GB
By selecting I/O the instrument requires now to specify whether to measure a signal or to perform a
simulation: for example Measure.
Figure 39 - Measure or Simulation selection
At this point the operator needs to select on which physical channel the thermocouple has to be
connected, example IN A.
Figure 40 - Input module selection
It is necessary now to select a thermocouple (Tc) or a thermoresistance (Rtd), for example Tc.
Figure 41 - Tc / Rtd selection