WIKA Pascal 100 - Manual (Page 5)

1 General Information
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 5
GB
1 General Information
■ The Multichannel Calibrator model Pascal 100 or Pascal 100/IS described in the operating
instructions has been manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental criteria during production. Our
management systems are certified to ISO 9001 and ISO 14001.
■ These operating instructions contain important information on handling the Multichannel
Calibrator model Pascal 100 or Pascal 100/IS. Working safely requires that all safety instructions
and work instructions are observed.
■ Observe the relevant local accident prevention regulations and general safety regulations for the
range of use of the Multichannel Calibrator model Pascal 100 or Pascal 100/IS.
■ The operating instructions are part of the instrument and must be kept in the immediate vicinity
of the Multichannel Calibrator model Pascal 100 or Pascal 100/IS and readily accessible to
skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the operating instructions, prior to
beginning any work.
■ The manufacturer's liability is void in the case of any damage caused by using the product
contrary to its intended use, non-compliance with these operating instructions, assignment of
insufficiently qualified skilled personnel or unauthorised modifications to the Pascal 100 or
Pascal 100/IS.
■ The general terms and conditions, contained in the sales documentation, shall apply.
■ Subject to technical modifications.
■ Factory calibrations/DKD/DAkks calibrations are carried out in accordance with international
standards.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Relevant Data Sheet: CT 18.01
- Application consultant: Tel.: (+49) 9372/132-9986
Fax: (+49) 9372/132-8767
E-Mail: [email protected]