WIKA Pascal 100 - Manual (Page 78)

6 Commissioning, operation
78 WIKA Operating Instruction, Pascal 100 and Pascal 100/IS
GB
Pressing POINTS, the list of the calibration points will be shown:
Figure 97 – Display test points Report
Pressing RESULT, the calibration results are shown:
Figure 98 – Display Report results
Press the
“scrolling menu”, menu with “As found”, “As left”, “Up”, “Down”, will appear to enable to
see the calibration results related to the different calibration stages.
“As found”, (calibration points before any adjustment on the DUT) “As left” (calibration points after
the adjustment on the DUT has been carried out)
,“Up” (calibration points going up), “Down”
(calibration points going down).
Pressing GRAPHIC, the graphic of the calibration will be displayed, see below:
Figure 99 – Display Report in graphic mode
Scrolling menu