Hart channel assignment – WIKA Pascal 100 User Manual
Page 55
Advertising
6 Commissioning, operation
WIKA Operating Instruction, Model Pascal 100 and Pascal 100/IS 55
GB
6.4.2.7 HART channel assignment
To select the channel press on one of the four large displays, then press CHANNEL. Once menu is
displayed press ASSIGN. Procedure is shown below:
Automatically the program shows the following configuration and it remains in this position till the
operator selects the parameter to be associated to the Channel 1.
For example, press HART for HART measurement.
The instrument requires the selection of the role:
Advertising