WIKA Pascal 100 User Manual
Page 48
Advertising
6 Commissioning, operation
48 WIKA Operating Instruction, Pascal 100 and Pascal 100/IS
GB
By selecting the input/output (I/O) the procedure requires to select MEASURE (to measure a
signal) or GENERATION (to generate a signal)
Figure 51
– Measure or generation selection
By pressing MEASURE, automatically the Pascal 100 or Pascal 100/IS requires to select input
module (IN A- IN B) to be used. Double input will be displayed when the calibrator has a double
input configuration and both modules are not assigned yet. Otherwise only one input will be
displayed
Figure 52
– mA selection from IN A or IN B
Advertising