American Aimers Vision 1 Optical Headlight Aimer - Manual (Page 12)

Vision 1 manual page 13 Page 1 of 1
http://www.hopkinsmfg.com/test2/vision_1_manual_page_13.htm 8/5/99
Home
Vision Aimers
Vision 100
Warranty Registration
Vision 1
Instructions
Parts List
B4A
Instructions
Parts List
Aiming Screen Manual
LiteMate Trailer Wiring
Levels
Contact Information
Vision 1 Instruction Manual
Page 13
SECTION TWO
When the desired aiming method is displayed as active (FIG. 17), press the "NEXT MENU" button,
(Button 5), to return to the SET OPTIONS screen.
2.7 EXPERT MODE
At the "SET OPTIONS" screen (FIG. 18), press "NEXT MENU" button, (Button 5).
This screen (FIG. 19) enables the operator to select expert mode off or on. When "EXPERT MODE
ON" is selected, several explanatory screens in the aiming process are bypassed. This provides an
experienced operator the benefit of a shortened aiming procedure. When "EXPERT MODE OFF" is
selected, each step of the aiming process is explained with the monitor display. When the desired
mode is displayed as active, press "NEXT MENU" button, (Button 5), to continue with the aimer
preparation.
Return to table of contents
[ Home ] [ Vision ] [ LiteMate ] [ Levels ] [ Contact Info ]