American Aimers Vision 1 Optical Headlight Aimer - Manual (Page 41)

Vision 1 manual page 43 Page 1 of 1
http://www.hopkinsmfg.com/test2/new_page_24.htm 8/5/99
Home
Vision Aimers
Vision 100
Warranty Registration
Vision 1
Instructions
Parts List
B4A
Instructions
Parts List
Aiming Screen Manual
LiteMate Trailer Wiring
Levels
Contact Information
Vision 1 Instruction Manual
Page 43
SECTION SEVEN
TROUBLESHOOTING
Follow is a corrective action guide to assist you in the event of a mechanical or electrical failure.
THERE ARE NO USER SERVICEABLE COMPONENTS WITHIN THE AIMER HOUSING OR MONITOR ASSEMBLY. REFER ANY NEEDED
REPAIRS OF THESE COMPONENTS TO QUALIFIED FACTORY SERVICE PERSONNEL ONLY.
If all of the actions for a particular symptom have been completed without success, contact a HOPPY® Customer Service Representative at 1-
800-390-7904 for further assistance.
SYMPTOM CAUSE ACTION ACTION
Nothing Happens Power Receptacle Check for voltage at receptacle
Power Cord Make sure both ends are plugged in securely
Aimer Power Fuse Check continuity of fuse
Aimer Modules Make sure all modules are plugged in securely Call
Self Check Failure Aimer Modules Make sure all modules are plugged in securely
Aimer does not roll straight Base Casters Check mounting and bearings
Floating Axle Check mounting Call
Aimer Head drifts down Vertical Brakes Check brake springs and shoes
Counterweight Check counter-weight cables
Vertical Tubes Check for excessive oil
Vertical Tube Bushings Check for damage or excessive wear Call
Return to table of contents
[ Home ] [ Vision ] [ LiteMate ] [ Levels ] [ Contact Info ]