American Aimers Vision 1 Optical Headlight Aimer - Manual (Page 40)

Vision 1 manual page 42 Page 1 of 1
http://www.hopkinsmfg.com/test2/new_page_23.htm 8/5/99
Home
Vision Aimers
Vision 100
Warranty Registration
Vision 1
Instructions
Parts List
B4A
Instructions
Parts List
Aiming Screen Manual
LiteMate Trailer Wiring
Levels
Contact Information
Vision 1 Instruction Manual
Page 42
SECTION SIX
6.4 OPERATING SPECIFICATIONS
ACCURACY:
Tested by the Canadian Standards Association Photometric Laboratory for compliance to the Society of Automotive Engineers (S.A.E.)
Specification for optical headlamp aimers (SAE J600 MAY81).
Equipment Compliance listing with American Association of Motor Vehicle Administrators (A.A.M.V.A.)
LIMITS:
Unit capabilities exceed SAE specification for headlamp height (12 inches to 54 inches).
DIAGNOSTICS:
Complete system check at power-up. System will prompt operator with message if a failure is noted.
DISPLAY:
Computer generated beam pattern image and operator prompts displayed on 9 inch graphics monitor.
OPERATION:
Completely menu-driven and user friendly.
Return to table of contents
[ Home ] [ Vision ] [ LiteMate ] [ Levels ] [ Contact Info ]