American Aimers Vision 1 Optical Headlight Aimer - Manual (Page 26)

Vision 1 manual page 27 Page 1 of 1
http://www.hopkinsmfg.com/test2/new_page_14.htm 8/5/99
Home
Vision Aimers
Vision 100
Warranty Registration
Vision 1
Instructions
Parts List
B4A
Instructions
Parts List
Aiming Screen Manual
LiteMate Trailer Wiring
Levels
Contact Information
Vision 1 Instruction Manual
Page 27
SECTION FIVE
Press the "OK" button, (Button 5), a second time, the aiming cycle for that lamp is completed (FIG.
21), and the aimer displays "AIM COMPLETE" (FIG. 22) and returns to the Main Menu.
5.3 TRACK ALIGNMENT - "EXPERT MODE OFF"
From the Main Menu (FIG. 1), press the "ALIGN HEADLAMPS" button, (Button 2). The aimer will
display (FIG. 2):
5.3.1 LASER LOCATORS
SCREEN 5:
APPLY LASER LOCATOR STICKER TO THE OPTICAL CENTERS OF THE LAMPS TO BE
AIMED. MOST LAMPS PROVIDE AN OPTICAL CENTER REFERENCE, (LOGO, FIDUCIARY
MARK "SMALL DOT", GRID LINES).
NEXT SCREEN...
Press the "NEXT SCREEN" button, (Button 5). The aimer will display (FIG. 3):
Return to table of contents
[ Home ] [ Vision ] [ LiteMate ] [ Levels ] [ Contact Info ]