American Aimers Vision 1 Optical Headlight Aimer - Manual (Page 19)

Vision 1 manual page 20 Page 1 of 1
http://www.hopkinsmfg.com/test2/vision_1_manual_page_20.htm 8/5/99
Home
Vision Aimers
Vision 100
Warranty Registration
Vision 1
Instructions
Parts List
B4A
Instructions
Parts List
Aiming Screen Manual
LiteMate Trailer Wiring
Levels
Contact Information
Vision 1 Instruction Manual
Page 20
SECTION FOUR
4.7 PRINTER OPTION:
The optional Printer and Printer Module provides hard copy documentation of before aim
measurements and after aim alignment verification.
4.8 SERIAL COMMUNICATION OPTION:
The Serial Communications Module option provides the capability to communicate with other
compatible computer base programs for statistical analysis and record compilation. Serial
Communication should be coordinated with Hopkins Engineers.
4.9 ALIGNMENT TRACK:
Provided with Vision 1™ to assure greater accuracy and repeatability. When placed under the front
or rear wheels of aimer, the aimer will roll straight and true over dirt or cracks. The track can be
permanently mounted in a designated aiming bay, where the perpendicular alignment of the vehicle
to the track is assured by wheel stops and/or wheel guides affording headlamp alignment without
the need to laser align aimer with vehicle.
4.10 CANDELA RATING:
During the aim cycle, the Vision 1™ measures the approximate candela, (brightness), of the lamp.
The measurement is displayed on the bottom of the aim screens.
4.11 SCREEN SAVER:
This feature protects the monitor from damage due to continuous image display on the screen.
After 5 minutes of inactivity to the computer from the keyboard, the monitor will display the
message "PRESS ANY BUTTON". This message will move about on the display screen. To return
to the prior display, press any button.
4.12 REPLACEMENT PARTS:
In the event of an equipment malfunction, contact a HOPPY® Customer Service Representative at
1-800-390-7904 for a complete replacement parts listing.
Return to table of contents
[ Home ] [ Vision ] [ LiteMate ] [ Levels ] [ Contact Info ]