Component testing – L.B. White Pilot User Manual
Page 49
Advertising
Attention
■
Many thermostats can be wired to open or close on an
increase in temperature.
■
Make sure the thermostat is wired properly so the
contacts close when the thermostat is set to a point
above room temperature and open when the
temperature is achieved. This will allow the heater to
cycle accordingly.
■
Refer to the heater wiring diagram or the wiring diagram
applied to the inside of the thermostat cover for proper
connection.
Continuity Checks
Component
Testing
August 1999
6.2-2
2
Thermostat
Advertising