Apple Motion 4 - Manual (Page 217)

Note: Depending on your project, dithering can be useful or problematic. For example,
enabling dithering in a project in which banding is present may reduce the appearance
of the banding. In a float project, dithering may cause excessive noise in the project’s
output. For this reason, a checkbox has been added to the General tab of the Project
Properties window that allows you to turn dithering on or off. This setting applies to the
display and export of a project.
Creating, Editing, and Deleting Presets
If you commonly create projects using custom settings that don’t match any of the
available presets, you can create a new preset with these settings for future use. Presets
are created, modified, and deleted in the Presets pane of Motion Preferences.
To create a new custom preset
1 Choose Motion > Preferences (or press Command-Comma).
2 In the Presets pane, choose Project Presets from the Show pop-up menu.
3 Click the Add button (+) beneath the presets list.
The Project Preset Editor appears.
4 In the Project Preset Editor, do the following:
a In the Name field, type a descriptive name for the preset.
217 Chapter 6 Creating and Managing Projects