Hsv adjust – Apple Motion 4 User Manual
Page 985
Parameters in the Inspector
Gradient:
Selects a gradient preset to be applied to the object, or is used to edit a custom
gradient.
For more information on using the Gradient editor, see
Offset:
Sets an amount, in degrees, that the color wheel is offset to determine color
application. Values start at 0 degrees.
Repeats:
Sets the number of times the gradient repeats over the course of its range.
Repeat Method:
Sets the method by which the gradient is mapped when repeating.
Values can be set to either Mirror (default) or Wrap. This parameter only affects the filter
when Repeats is set to a number greater than 1.
Map Channel:
Sets the channel used to determine how the image is colorized. Values
can be selected from the following: Luminance (default), Red, Green, Blue, or Alpha.
Mix:
Sets what percentage of the original image is blended with the color-corrected
image.
HUD Controls
The HUD contains the following controls: Gradient, Offset, Repeats, Repeat Method, and
Map Channel.
HSV Adjust
An alternate method of performing color correction based on the HSV color model. HSV
is often used in computer interfaces.
This filter provides controls to adjust the Hue, Saturation, and Value levels in an image.
The Hue control is an angular representation of the color values in an image. By rotating
the Hue angle, you uniformly remap the colors throughout an image, similar to the effect
of turning the hue or phase knob of a broadcast monitor.
985
Chapter 16
Using Filters