JLG 600SC_660SJC Service Manual - Manual (Page 149)

SECTION 6 - UNDERCARRIAGE
3120898 – JLG Lift – 6-45
8. Remove Piston (5).
9. Remove shaft link (6).
10. Remove brake disks (7).
11. Remove supporting ring (8).
12. Use tooling (C) to remove snap ring (9).
13. Remove seal (10) from spindle (11).
14. Remove seals (12) from piston (5).
15. Use lifting straps and tooling (D) in order to lift the
final drive off tooling (A).
16. Carefully rotate the final drive so that the planetary
cover is up.
17. Fasten the final drive to tooling (A).