JLG 600SC_660SJC Service Manual - Manual (Page 159)

SECTION 6 - UNDERCARRIAGE
3120898 – JLG Lift – 6-55
38. Use tooling (C) to install snap ring (9).
39. Install supporting ring (8).
40. Install brake disks and plates (7).
NOTE: There are six disks and five plates. Start the installa-
tion with a disk. Alternate between disks and plates.
End the installation with a disk.
41. Install shaft link (6).
NOTE: Lubricate the seals before installing the piston.
Install the piston carefully in order to prevent dam-
age to the seals.
42. Install piston (5).
43. Install spacer ring (3) and twenty springs (4).