JLG 600SC_660SJC Service Manual - Manual (Page 75)

SECTION 4 - BOOM & PLATFORM
3120898 – JLG Lift – 4-35
4. Next push the ENTER key, this will now show the
RIGHT FWD THRESHOLD setting in the display, the
default setting will blink now letting you know you
can adjust.
5. Next push the ENTER key, this will now show BOTH
of the REV THRESHOLD settings on the display, the
default setting will blink now letting you know you
can adjust.
6. Next push the ENTER key, this will show the LEFT
REV THRESHOLD setting on the display, the default
setting will blink now letting you know you can
adjust.
7. Next push the ENTER key this will show RIGHT REV
THRESHOLD setting on the display, the default set-
ting will blink now letting you know you can adjust.