JLG 600SC_660SJC Service Manual - Manual (Page 77)

SECTION 4 - BOOM & PLATFORM
3120898 – JLG Lift – 4-37
12. Next push the ENTER key, this will now show you
the RIGHT MAX OUT FWD setting on the display, the
default setting will blink now letting you know you
can adjust.
13. Next push the ENTER key, this will now show you
the BOTH MAX OUT REV settings in the display, the
default settings will now blink letting you know you
can adjust.
14. Next push the ENTER key, this will now show you
the LEFT MAX OUT REV settings on the display, the
default settings will now blink letting you know you
can adjust.
15. Next push the ENTER key, this will show you the
RIGHT MAX OUT REV settings on the display, the
default settings will now blink letting you know you
can adjust.