JLG 600SC_660SJC Service Manual - Manual (Page 73)

SECTION 4 - BOOM & PLATFORM
3120898 – JLG Lift – 4-33
1. When the optimizer is first plugged in, the following
will be displayed.
2. Next, move the joystick into the left or right positions
(STEER) (DS2), this will tell you the percentage of
input traveling into the Superflex, the range of travel
is 15% at Threshold to 23% Max Ou
t.
Ex: Threshold R= Rear F= Forward
3. Next move the joystick into the forward or reverse
position (DRIVE) (DS1), this will tell you the percent-
age of input traveling into the Superflex, the range of
travel is 17% at Threshold to 38% Max Out.
Ex: Max Out