JLG 600SC_660SJC Service Manual - Manual (Page 76)

SECTION 4 - BOOM & PLATFORM
4-36 – JLG Lift – 3120898
8. Next push the ENTER key, this will now show the
newly adjusted settings if you chose to change
them.
9. Now push the (+) key, this should show you the
MAX OUT adjustment mode.
10. Next push the ENTER key, this will now show you
the BOTH MAX OUT FWD setting on the display, the
default setting will blink now letting you know you
can adjust.
11. Next push the ENTER key, this will now show you
the LEFT MAX OUT FWD setting on the display, the
default setting will blink now letting you know you
can adjust.