AirLive SNMP-FSH2602MG v2 - Manual (Page 103)

5. Console Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 98
„ 802.1x Setup
1. Select
<Edit>
2. Use “Space” key to Enable or Disable the 802.1x.
3. Select <Save>
„
System Configuration
After enabling the IEEE 802.1x function, you can configure the parameters of this function.
1. Select
<Edit>.
2. Radius Server IP: set the Radius Server IP address.
3. Shared Key: set an encryption key for using during authentication sessions with the
specified radius server. This key must match the encryption key used on the Radius
Server.
4. NAS, Identifier: set the identifier for the radius client.
5. Server Port: set the UDP destination port for authentication requests to the specified
Radius Server.
6. Accounting Port: set the UDP destination port for accounting requests to the
specified Radius Server.
7. Select <Save>.