AirLive SNMP-FSH2602MG v2 - Manual (Page 83)

5. Console Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 78
Priority Configuration
You can configure port priority level. There are 0~7-priority level can map to high or low
queue.
1. Select
<Edit>.
2. Set the Level 0~7 priority, use “Space” key to change the value.
3. Press
“Space” key to select the priority level mapping to high or low queue.
4. Qos Mode: select the mode to process incoming packets.
„ First Come first service: the switch will process the packet that is coming first.
„ All High Before low: the packet priority is high will be process before the packet
priority is low.
„ Weight Round Ration 2:1: the switch will process 2 high priority packets first, the
process 1 low priority packet.
„ Weight Round Ration 3:1: the switch will process 3 high priority packets first, the
process 1 low priority packet.
„ Weight Round Ration 4:1: the switch will process 4 high priority packets first, the
process 1 low priority packet.
„ Weight Round Ration 5:1: the switch will process 5 high priority packets first, the
process 1 low priority packet.
„ Weight Round Ration 6:1: the switch will process 6 high priority packets first, the
process 1 low priority packet.
„ Weight Round Ration 7:1: the switch will process 7 high priority packets first, the
process 1 low priority packet.
5. Press “ESC” goes back action menu line.
6. Select <Save> to save all configure value.