AirLive SNMP-FSH2602MG v2 - Manual (Page 88)

5. Console Management in SNMP-FSH2602MG v2
83
AirLive SNMP-FSH2602MG v2 User’s Manual
„
All MAC Address
1. Select
<Select> key to select a port.
2. Press “Space” key to select the priority number and then press “Enter”.
3. The current static & dynamic MAC address information of the port will be displayed.
Misc Configuration
You can configure the switch parameters and stacking function. The stacking function
provides you can centralize the control of the switch in the network. For the manager
personal, he/she can save the time and easily on switches controlling.
„
MAC Address Ageing Time: MAC address table refresh time setting. Type the
number of seconds that an inactive MAC address remains in the switch’s address table.
The valid range is 0, 300~765 seconds. Default is 300 seconds.
„ Broadcast Storm Filter mode: configure the broadcast storm filter mode. The valid
threshold values are 5%, 10%, 15%, 20%, 25%, and N/A. The port will be block cause
of broadcast packet is over the percentage of traffic.
„ Max Bridge Transmit Delay Bound: Limit the packets queuing time in switch. If