AirLive SNMP-FSH2602MG v2 - Manual (Page 77)

5. Console Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 72
VLAN Configuration
You can configure VLAN in VLAN Configuration. There are four functions in VLAN
Configuration mode: VLAN Configuration, Create a VLAN Group, Edit/Delete VLAN Group
and Group Sorted Mode. Follow the below description to configure VLAN.
„
VLAN Configure
Before starting to configure VLAN, you must select the VLAN mode in VLAN Configure
function. Otherwise, user cannot create any new VLAN.
1. Select the <Edit>.
2. Select the VLAN mode by using “Space” key. There are two VLAN modes: Port Based
mode and 802.1Q mode.
„ 802.1Q VLAN mode: configuration VLAN ID, Ingress Filter, and Acceptable
Frame Type.
z
VLAN ID (Port VID: 1~255): Type the PVID.
z Ingress Filter: It matches that Ingress Filtering Rule 1 on web. Only forward
packets with VID matching this port’s configured VID. Press “Space” key to
choose forward or drop the frame that VID not matching this port’s configured
VID.
z Acceptable Frame type: It matches that Ingress Filtering Rule 2 on web. Drop
untagged frame. Press “Space” key to select drop or forward the untagged