AirLive SNMP-FSH2602MG v2 - Manual (Page 45)

4. Web Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 40
Basic
1. Click
“Add” button to create new VLAN.
2. Group Name: Assign a name for new VLAN.
3. Enable GVRP Protocol: Check the check box to enable GVRP protocol.
4. VLAN ID: Fill in a VLAN ID (between 2 to 4094). The default is 1.
5. Protocol VLAN: Choose the protocol type. Default is NONE.
6. From the available port box, select ports to add to the switch and click “Add” button. If
the trunk group exists, you can see it on the bottom of the menu (ex: Trunk. 1), and you
can configure it as the member of the VLAN or not.
The default VLAN can’t
be deleting
Check the check box to
enable GVRP protocol