AirLive SNMP-FSH2602MG v2 - Manual (Page 62)

4. Web Management in SNMP-FSH2602MG v2
57
AirLive SNMP-FSH2602MG v2 User’s Manual
configuration or you re-configure one of the slave switched as the master by console
interface.
1. Click
“IP Stacking” in the menu bar.
2. Group ID (0...65535): Assign a group ID for stacking group. The switches in the same
stacking group have same group ID. The valid range is from 1 to 65535.
3. Stacking Mode: Select the stacking mode from drag down list.
„ Disable: It means the switch doesn’t belong to any stacking group or stacking
function is disabled.
„ Master: It means the switch is the leader (master) in the stacking group. The
master switch can control all the slave switches in stacking group.
„ Slave: it means the switch is a slave switch of the stacking group. To configure the
slave switch that you must access by the master switch.
4. System Information: Enter system information in box.