AirLive SNMP-FSH2602MG v2 - Manual (Page 6)

1. Introduction
1
A irLive SNMP-FSH2602MG v2 User’s Manual
1
1.
Introduction
1.1 Overview
The SNMP-FSH2602MG v2 is a multi-port Ethernet Switch that can be used to build
high-performance switched workgroup networks. It is a store-and-forward device that offers
low latency for high-speed networking. The SNMP-FSH2602MG v2 is targeted at
workgroup, department or backbone computing environment.
1.2 How to Use This Guide
SNMP-FSH2602MG v2 is a SNMP managed Switch with many functions. It is
recommended that you read through the entire user’s guide whenever possible. The user
guide is divided into different chapters. You should read at least go through the first 3
chapters before attempting to install the device.
Recommended Reading
Chapter 1: This chapter explains the basi information for SNMP-FSH2602MG v2. It is a
must read.
Chapter 2: This chapter is about hardware installation. You should read through the
entire chapter.
Chapter 3:
„ 3.1 Important Information: This section has information of default setting such as
IP, Username, and Password.
„ 3.3 Management Interface: This section introduces Web management, and
Console management.
„ 3.4 Introduction to Web Management: This section tells you how to get into the
WebUI using HTTP.
Chapter 4: This chapter explains all of the management functions via Web management.
Chapter 5: This chapter explains all of the management functions via Console
management.