AirLive SNMP-FSH2602MG v2 - Manual (Page 43)

4. Web Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 38
2. Enter the Group Name, VLAN ID and select the members of VLAN group, then click
“Add” button to add members to right column.
3. Click “Apply” button to apply your setting.
4. After creating one VLAN, you will see the VLAN group displays in main screen.
In the below figure, it show that you have created one VLAN group whose Group name
is Test1 and VLAN ID is 1.
Choose port and then click “Add” button
to add this port on VLAN group.