AirLive SNMP-FSH2602MG v2 - Manual (Page 85)

5. Console Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 80
„ Static MAC Address
When you add a static MAC address, it remains in the switch's address table, regardless of
whether the device is physically connected to the switch. This saves the switch from having
to re-learn a device's MAC address when the disconnected or powered-off device is active
on the network again. You can add / modify / delete a static MAC address.
Add the Static MAC Address
You can add static MAC address in switch MAC table.
1. Select <Add> Æ <Edit> key to add the static MAC address.
2. MAC Address: Enter the MAC address of the port that should permanently forward
traffic, regardless of the device network activity.
3. Port No.: Press “Space” key to select the port number.
4. VLAN ID: Enter the Mac address’s VLAN ID, if the Mac address belongs to any VLAN
group.
Note: if user does not do any VLAN configuration in advance, the setting of VALN ID
will not showed in the screen.
5. Press “ESC” to go back action menu line.
6. Select
<Save> to save all configure value.