6 led table, 3 power on – AirLive SNMP-FSH2602MG v2 User Manual
Page 13
![background image](/manuals/553959/13/background.png)
2. Installing the SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual
8
Note: For proper ventilation, allow about at least 4 inches (10 cm) of clearance on the
front and 3.4 inches (8 cm) on the back of the Switch. This is especially important for
enclosed rack installation.
2.5.3 Power On
Connect the power cord to the power socket on the rear panel of the SNMP-FSH2602MG
v2. The other side of power cord connects to the power outlet. The internal power supply of
the SNMP-FSH2602MG v2 works with voltage range of AC in the 100-240VAC, frequency
50~60Hz. Check the power indicator on the front panel to see if power is properly supplied.
2.6 LED Table
The LED Indicators gives real-time information of systematic operation status. The
following table provides descriptions of LED status and their meaning.
LED
Status
Description
Green
Power On
Power
Off
Power is not connected