AirLive SNMP-FSH2602MG v2 User Manual
Page 44
4. Web Management in SNMP-FSH2602MG v2
39
AirLive SNMP-FSH2602MG v2 User’s Manual
5. If the group’s list is over one page, you can click “Next Page” button to view other
VLAN groups.
6. Use
“Delete” button to delete unwanted VLAN.
7. Use
“Edit” button to modify existing VLAN group.
4.4.7.2 802.1Q VLAN
Tagged-based VLAN is an IEEE 802.1Q specification standard. Therefore, it is possible to
create a VLAN across devices from different switch venders. IEEE 802.1Q VLAN uses a
technique to insert a “tag” into the Ethernet frames. Tag contains a VLAN Identifier (VID)
that indicates the VLAN numbers.
You can create Tag-based VLAN, and enable or disable GVRP protocol. There are 256
VLAN groups provided to configure. Enable 802.1Q VLAN, the all ports on the switch
belong to default VLAN, VID is 1. The default VLAN can’t be deleting.
GVRP allows automatic VLAN configuration between the switch and nodes. If the switch is
connected to a device with GVRP enabled, you can send a GVRP request using the VID of
a VLAN defined on the switch; the switch will automatically add that device to the existing
VLAN.