AirLive SNMP-FSH2602MG v2 - Manual (Page 93)

5. Console Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual 88
connected to a device that knows nothing about STP or RSTP. Usually, the connected
device is an end station. Edge Ports will immediately transit to forwarding state and skip
the listening and learning state because the edge ports cannot create bridging loops in
the network. This will expedite the convergence. When the link on the edge port toggles,
the STP topology keeps unchanged. Unlike the designate port or root port though, an
edge port will transit to a normal spanning-tree port immediately if it receives a BPDU.
The default is True.
4. Admin Non Stp: The port includes the STP mathematic calculation. True is not
including STP mathematic calculation. False is including the STP mathematic
calculation. The default is False.
5. Press “ESC” goes back action menu line.
6. Select <Save> to save all configure value.
7. On the action menu line you can press <Next Page> to configure port9 ~ port26, press
<Previous Page> return to previous page.
„
Per Port Status
It will display the status of every port.