12 802.1x – AirLive SNMP-FSH2602MG v2 User Manual
Page 55
4. Web Management in SNMP-FSH2602MG v2
AirLive SNMP-FSH2602MG v2 User’s Manual
50
4.4.12 802.1X
When enabling the IEEE 802.1X function, you can configure the parameters of this
function.
System Configuration
1. Radius Server IP: Set the IP address of Radius Server.
2. Server Port: Set the UDP destination port for authentication requests to the specified
Radius Server.
3. Accounting Port: Set the UDP destination port for accounting requests to the
specified Radius Server.
4. Shared Key: Set an encryption key for use during authentication sessions with the
specified radius server. This key must match the encryption key used on the Radius
Server.
5. NAS, Identifier: Set the identifier for the radius client.
6. Click
“Apply” button to apply your setting.