Heidolph LABOROTA 20 compact and safety - Manual (Page 62)

62
E
Accessories (optional)
Item P/N
10 l evaporator flask 15-300-003-16
20 l powder flask 15-300-003-19
10 l powder flask 15-300-003-18
Temperature sensor
(for both, boiling temperature and T auto; order 2 ea. when
using both options) 14-014-003-06-2
Base cart for LABOROTA 20 control 591-23000-00-1
5 liters bath liquid 515-31000-00
GENERAL
Unpack your LR20 carefully.
Inspect for damage and report such damage or missing parts to your supplier right away.
Read your Instruction Manual carefully. Take time to save time while using your
LABOROTA 20. Make sure that every user has read and understood the Instruction
Manual.
Please keep the Instruction Manual in a place easily accessible to every user.
IF ALL ELSE FAILS, READ THESE INSTRUCTIONS !
For safety reasons, connect your LABOROTA 20 control with a grounded outlet only. (also
refer to “Lab Installation”)
Using de-ionized or distilled water needs to add 0.2 % of Borax (Na
2
B
4
O
7
*10H
2
O)
(corrosion inhibitor)
Please note: The use of tabwater as heating media can lead to calcification which
can provoke crevice corrosion.Therefore the user is strongly recommended to
clean the heating bath with an adequate polish on a regular basis.