INFICON Sensistor ILS500F Leak Detection System - Manual (Page 18)

Setup 18
ninp69e1-a (1410)
4 Setup
4.1 Placement of the ILS500 F
Place the ILS500 F on a flat surface, as close as possible to the test fixture and
ventilation system.
Some free space must be provided around the ILS500 F to enable maintenance and
service access.
Ensure that there is at least 350 mm (14 in.) of free space behind the ILS500 F to
enable removal of service hatches, connection of supplies, test fixture etc.
Caution
Check that you comply with all relevant legislation and safety standards before
putting your ILS500 F into service.
Notice Start-up time for the leak detectors can be up to 10 minutes, depending
on the condition.
≥ 350 mm (14 in.)